Bathtub Refinishing & Reglazing · SW Florida

Bathtub Refinishing
in Southwest Florida

Stained, chipped, or faded tub? We resurface cast iron, fiberglass, and acrylic bathtubs to a factory-fresh finish — without demolition, without a dumpster, and for a fraction of replacement cost.

Text us a photo — get a quote today Call Oscar · 239-307-7945

16 years reglazing SW Florida

10,000+ projects completed

Lifetime warranty available (Gold)

2.5–3.5 hrs typical service time

🛁

Bathtub Resurfacing · SW Florida

Coastal-grade coating for cast iron, fiberglass & acrylic tubs

Naples humidity and salt air are harder on porcelain and fiberglass than anywhere inland. Our coastal-grade two-part urethane topcoat is engineered to resist moisture intrusion, mold growth, and UV yellowing — giving your tub a durable, high-gloss finish that lasts years, not months.

Whether your tub is original avocado-green cast iron, a builder-grade fiberglass drop-in, or a cultured marble alcove unit, we match the color, refinish the surface, and hand it back to you looking brand new — in a single visit.

Tub types we reglaze

Cast iron (porcelain enamel original or previously reglazed)
Fiberglass one-piece units & drop-in tubs
Acrylic freestanding & alcove tubs
Cultured marble & solid surface tubs
Steel-enameled tubs (vintage or modern)

What’s included in every refinishing job

Deep acid etch & mechanical prep
Chip, crack & scratch repair (standard)
Bonding primer specifically formulated for porcelain & fiberglass
2–3 topcoats of coastal-grade two-part urethane
Color match or standard white/bone palette
Reseal of all plumbing penetrations
Final inspection & cure instructions
Silver (3-year) or Gold (limited lifetime) transferable warranty

Cost comparison

Full tub replacement $3,000 – $8,000+

Bathtub reglazing / resurfacing $350 – $650

You save Up to 90%

Text a photo for a fast quote

Refinishing vs. Replacement: the real numbers

Factor	Bathtub Refinishing	Full Replacement
Cost	$350 – $650	$3,000 – $8,000+
Time to complete	2.5 – 3.5 hours	2 – 5 days demo + install
Dry / ready to use	Next morning	Grout cures 24 – 72 hrs
Demolition required	None	Full surround tear-out
HOA / condo board disruption	Minimal — one crew, one visit	Multiple trades, noise, debris
Warranty	Silver 3-yr or Gold lifetime	Varies by installer

Our 4-step bathtub resurfacing process

Inspect & prep

We assess the surface, tape off fixtures, and ventilate the space. Any chips or cracks are filled before coating begins.

Etch & prime

Acid etch opens the pores of the old surface. Our bonding primer locks in adhesion on porcelain, fiberglass, and acrylic alike.

Apply coastal-grade topcoat

Two to three hand-applied urethane coats build a hard, glossy finish engineered for Florida humidity and salt air.

Cure & sign-off

We walk you through cure instructions. Tub is ready to use the next morning. Silver or Gold warranty issued on the spot.

★★★★★

"Our master bath tub in Pelican Bay hadn't looked right since we moved in — yellowed and scratched everywhere. Bathtub Pros showed up on time, finished in about three hours, and it looked brand new the next morning. Oscar followed up personally. Worth every penny."

— Margaret T., Pelican Bay, Naples

$50 off when you text a photo first

Skip the estimate visit. Text us a photo of your tub and get a firm price in under an hour. Mention this offer and we'll take $50 off any refinishing job.

Text a photo now →

Bathtub refinishing & reglazing across SW Florida

Naples

Marco Island

Bonita Springs

Estero

Lehigh Acres

Fort Myers

Sanibel

Cape Coral

Punta Gorda

Port Charlotte

Bathtub refinishing FAQs

How long does bathtub refinishing take?

Most bathtub reglazing jobs in SW Florida take 2.5 to 3.5 hours from prep to final coat. You can use the tub the next morning after the urethane has cured overnight.

How long does the refinished surface last?

With normal care, a professionally resurfaced tub lasts 10–15 years. Avoid abrasive cleaners and use a gentle bath cleaner. Our Gold warranty covers the finish for the life of your ownership.

Can you refinish a tub that has already been reglazed?

Yes. We strip or abrade the old coating, inspect for delamination, and apply fresh primer and topcoat. We've resurfaced hundreds of previously reglazed tubs in Naples, Fort Myers, and Cape Coral.

Do you work in condos and HOA communities?

Absolutely. Most of our work is in Pelican Bay, Mediterra, and Fiddler's Creek — communities where condo boards require minimal disruption. One crew, one visit, no heavy equipment, no debris removal needed.

What's the difference between refinishing, resurfacing, and reglazing?

They all describe the same process: stripping or etching the old surface and applying a new high-gloss coating. We use all three terms because homeowners search for each one — the result is identical.

Is the coating safe once cured?

Yes. Once fully cured (typically 24 hours), the two-part urethane is inert and food-safe. During application we ventilate the space and recommend you leave the area for 2–3 hours.

More services from Bathtub Pros

Tub & Tile Reglazing Shower Resurfacing Jacuzzi & Soaking Tub Refinishing Bathtub Repairs Chip Repair Countertop Resurfacing Failed Coating Removal

Ready to restore your bathtub?

Text us a photo and get a firm quote in under an hour. Oscar answers personally. Serving Naples, Fort Myers, Cape Coral, and all of SW Florida since 2010.