Countertop Refinishing & Reglazing · SW Florida

Countertop Refinishing
in Southwest Florida

Stained laminate, scratched cultured marble, or outdated tile countertops — we resurface and reglaze them to a fresh, hard-gloss finish without demo, without replacement, and without the lead time.

Text us a photo — get a quote today Call Oscar · 239-307-7945

16 years serving SW Florida

10,000+ projects completed

Lifetime warranty available (Gold)

2.5–3.5 hrs typical service time

🏠

Countertop Resurfacing · SW Florida

Coastal-grade countertop coating that holds up in Florida kitchens & baths

Florida heat, humidity, and hard water take a toll on countertops faster than anywhere else. Laminate edges delaminate. Cultured marble loses its sheen. Tile grout discolors. Rather than a $5,000–$15,000 countertop replacement project, we reglaze the existing surface — properly — for a fraction of the cost.

Our coastal-grade two-part urethane topcoat bonds to laminate, cultured marble, solid surface, and glazed tile. It resists heat up to 350°F, handles typical kitchen cleaning products, and provides a high-gloss or satin finish that reads as genuinely new. Condo owners in Estero and Bonita Springs use this service to refresh kitchens between tenants in a single day.

Countertop surfaces we refinish & reglaze

Laminate countertops (Formica, Wilsonart, builder-grade)
Cultured marble countertops & vanity tops
Solid surface countertops (Corian-type materials)
Ceramic & porcelain tile countertops
Fiberglass countertop surfaces
Bathroom vanity tops in one-piece units

What’s included in every countertop refinishing job

Surface cleaning, degreasing & light sanding
Edge and seam repair (laminate lift, chips)
Bonding primer for the specific surface material
2–3 coats of coastal-grade two-part urethane topcoat
Color selection: white, bone, or match existing
Sink and hardware masking & protection
Final cure inspection & use instructions
Silver (3-year) or Gold (limited lifetime) transferable warranty

Cost comparison

Full countertop replacement $3,000 – $15,000+

Countertop resurfacing / reglazing $300 – $700

You save Up to 95%

Text a photo for a fast quote

Our 4-step countertop resurfacing process

Clean & prep

Degrease, sand lightly, and repair any edge lift or chips. Clean surface is everything — adhesion starts here.

Prime

Bonding primer selected for your specific surface material — laminate, cultured marble, or tile. Proper primer is what separates a lasting finish from a peeling one.

Apply coastal-grade topcoat

Two to three urethane coats applied by spray or brush-roll. High-gloss or satin. Engineered for Florida humidity.

Cure & sign-off

Light use the same evening, full use the next morning. Silver or Gold warranty issued. Done in one visit.

★★★★★

"I manage a small condo complex in Estero and we've used Bathtub Pros for countertop resurfacing between every tenant for three years. The finish holds, the price makes sense, and they're in and out in a day. Oscar is reliable — which is rare."

— David K., Property Manager, Estero

$50 off when you text a photo first

Text us a photo of your countertop and we'll quote the full reglazing job in under an hour. Mention this offer for $50 off.

Text a photo now →

Countertop refinishing & resurfacing across SW Florida

Naples

Marco Island

Bonita Springs

Estero

Lehigh Acres

Fort Myers

Sanibel

Cape Coral

Punta Gorda

Port Charlotte

Countertop refinishing FAQs

Can you refinish laminate countertops?

Yes. Laminate is one of our most common countertop refinishing jobs in SW Florida. We lightly sand, apply a bonding primer, and spray 2–3 coats of our coastal-grade urethane. Edge lift is repaired first. Most laminate countertop jobs take about 2.5 hours.

How long does countertop resurfacing last?

With normal care, a professionally refinished countertop lasts 5–10 years. Avoid cutting directly on the surface, use trivets for hot pots, and clean with non-abrasive products. Our Gold warranty covers the finish for the life of your ownership.

Can you match the existing color?

We can closely match most standard countertop colors. For exact color matching, we work from samples. We also offer a range of standard colors — white, off-white, bone, and a few contemporary options — that work well for kitchen and bath updates.

Does the coating hold up to heat and water?

Yes. Our two-part urethane topcoat is rated to handle temperatures up to 350°F and is designed for Florida humidity and hard water. It is the same coating system we use on tubs and showers — engineered for wet environments.

What's the difference between refinishing, resurfacing, and reglazing a countertop?

All three terms describe the same process: etching or sanding the old surface, applying bonding primer, and spraying a new high-gloss coating. We use all three terms because homeowners search for each. The result is identical.

Do you do countertop work in condo communities?

Yes — countertop resurfacing is a common service for property managers and condo owners in communities like Tiburon, Coconut Point, and Cape Harbour. One crew, one visit, no demo, no debris. No HOA escalation required for what's essentially maintenance work.

More services from Bathtub Pros

Bathtub Reglazing Tub & Tile Refinishing Shower Reglazing Jacuzzi & Soaking Tub Resurfacing Bathtub Repairs Chip Repair Failed Coating Removal

Ready to refresh your countertops?

Text us a photo and get a firm price in under an hour. Oscar answers personally. Serving kitchens and bathrooms across SW Florida since 2010.